NAME
    gcloud alpha blockchain-validator blockchain-validator-configs update -
        update the configuration of a single blockchain validator

SYNOPSIS
    gcloud alpha blockchain-validator blockchain-validator-configs update
        (BLOCKCHAIN_VALIDATOR_CONFIG : --location=LOCATION) [--async]
        [--blockchain-node-id=BLOCKCHAIN_NODE_ID]
        [--ethereum-protocol-details-graffiti=ETHEREUM_PROTOCOL_DETAILS_GRAFFITI]
        [--request-id=REQUEST_ID] [--[no-]validation-work-enabled]
        [--labels=[LABELS,...]
          | --update-labels=[UPDATE_LABELS,...] --clear-labels
          | --remove-labels=[__REMOVE_LABELS,...]]
        [--remote-web3-signer-timeout-duration=REMOTE_WEB3_SIGNER_TIMEOUT_DURATION --remote-web3-signer-web3signer-uri=REMOTE_WEB3_SIGNER_WEB3SIGNER_URI]
        [GCLOUD_WIDE_FLAG ...]

DESCRIPTION
    (ALPHA) Update the configuration of a single blockchain validator.

EXAMPLES
    To enable validation work on a previously disabled blockchain validator
    my-validator in the project my-project and location us-central1 run:

    $ gcloud alpha blockchain-validator blockchain-validator-configs \        update my-validator --location=us-central1 \
        --project=my-project --validation-work-enabled=true

POSITIONAL ARGUMENTS
     BlockchainValidatorConfig resource - Blockchain Validator Config Name The
     name of the Blockchain Validator Config. The fully specified name must
     have the format
     projects/{project}/locations/{location}/blockchainValidatorConfigs/{validator}.
     The arguments in this group can be used to specify the attributes of this
     resource. (NOTE) Some attributes are not given arguments in this group but
     can be set in other ways.

     To set the project attribute:
      ◆ provide the argument blockchain_validator_config on the command line
        with a fully specified name;
      ◆ provide the argument --project on the command line;
      ◆ set the property core/project.

     This must be specified.

       BLOCKCHAIN_VALIDATOR_CONFIG
          ID of the blockchainValidatorConfig or fully qualified identifier for
          the blockchainValidatorConfig.

          To set the blockchain_validator_config attribute:
          ▸ provide the argument blockchain_validator_config on the command
            line.

          This positional argument must be specified if any of the other
          arguments in this group are specified.

       --location=LOCATION
          The location id of the blockchainValidatorConfig resource.

          To set the location attribute:
          ▸ provide the argument blockchain_validator_config on the command
            line with a fully specified name;
          ▸ provide the argument --location on the command line.

FLAGS
     --async
        Return immediately, without waiting for the operation in progress to
        complete.

     Arguments for the blockchain node.

       --blockchain-node-id=BLOCKCHAIN_NODE_ID
          The fully qualified name of the blockchain node which carries out
          work on behalf of the validator. If not set, the validator must
          either be operated outside of Blockchain Validator Manager, or it
          will be offline (no attestations or blocks will be produced). If this
          node is offline or deleted, the validator will be offline.

     Arguments for the blockchain type details.

       Blockchain validator configuration unique to Ethereum blockchains.

         Arguments for the graffiti.

           --ethereum-protocol-details-graffiti=ETHEREUM_PROTOCOL_DETAILS_GRAFFITI
              Graffiti is a custom string published in blocks proposed by the
              validator. This can only be written, as the current value cannot
              be read back from the validator client API. See
              https://lighthouse-book.sigmaprime.io/graffiti.html for an
              example of how this is used. If not set, the validator client's
              default is used. If no blockchain node is specified, this has no
              effect as no validator client is run.

     --request-id=REQUEST_ID
        An optional request ID to identify requests. Specify a unique request
        ID so that if you must retry your request, the server will know to
        ignore the request if it has already been completed. The server will
        guarantee that for at least 60 minutes since the first request.

        For example, consider a situation where you make an initial request and
        the request times out. If you make the request again with the same
        request ID, the server can check if original operation with the same
        request ID was received, and if so, will ignore the second request.
        This prevents clients from accidentally creating duplicate commitments.

        The request ID must be a valid UUID with the exception that zero UUID
        is not supported (00000000-0000-0000-0000-000000000000).

     --[no-]validation-work-enabled
        True if the blockchain node requests and signs attestations and blocks
        on behalf of this validator, false if not. This does NOT define whether
        the blockchain expects work to occur, only whether the blockchain node
        specified above is carrying out validation tasks. This should be
        enabled under normal conditions, but may be useful when migrating
        validators to/from Blockchain Node Engine, where the validator may be
        paused during the migration. Use --validation-work-enabled to enable
        and --no-validation-work-enabled to disable.

     Update labels.

     At most one of these can be specified:

       --labels=[LABELS,...]
          Set labels to new value. Labels as key value pairs.

           KEY
              Keys must start with a lowercase character and contain only
              hyphens (-), underscores (_), lowercase characters, and numbers.

           VALUE
              Values must contain only hyphens (-), underscores (_), lowercase
              characters, and numbers.

          Shorthand Example:

              --labels=string=string

          JSON Example:

              --labels='{"string": "string"}'

          File Example:

              --labels=path_to_file.(yaml|json)

       --update-labels=[UPDATE_LABELS,...]
          Update labels value or add key value pair. Labels as key value pairs.

           KEY
              Keys must start with a lowercase character and contain only
              hyphens (-), underscores (_), lowercase characters, and numbers.

           VALUE
              Values must contain only hyphens (-), underscores (_), lowercase
              characters, and numbers.

          Shorthand Example:

              --update-labels=string=string

          JSON Example:

              --update-labels='{"string": "string"}'

          File Example:

              --update-labels=path_to_file.(yaml|json)

       At most one of these can be specified:

         --clear-labels
            Clear labels value and set to empty map.

         --remove-labels=[__REMOVE_LABELS,...]
            Remove existing value from map labels.

     Arguments for the key source config.

       Configuration to use an external key signing service, such as the
       service endpoint. The external key signer is expected to be managed
       entirely by the customer. For reference see
       https://docs.web3signer.consensys.net/ for details on Web3Signer and
       https://docs.web3signer.consensys.net/reference/api/json-rpc for the API
       exposed by the external service.

         Arguments for the timeout duration.

           --remote-web3-signer-timeout-duration=REMOTE_WEB3_SIGNER_TIMEOUT_DURATION
              Timeout for requests to the Web3Signer service.

         --remote-web3-signer-web3signer-uri=REMOTE_WEB3_SIGNER_WEB3SIGNER_URI
            URI of the Web3Signer service the validator client connects to, to
            request signing of attestations, blocks, etc.

GCLOUD WIDE FLAGS
    These flags are available to all commands: --access-token-file, --account,
    --billing-project, --configuration, --flags-file, --flatten, --format,
    --help, --impersonate-service-account, --log-http, --project, --quiet,
    --trace-token, --user-output-enabled, --verbosity.

    Run $ gcloud help for details.

API REFERENCE
    This command uses the blockchainvalidatormanager/v1 API. The full
    documentation for this API can be found at:
    https://cloud.google.com/blockchain-node-engine/docs/create-node-ethereum#validator_configuration

NOTES
    This command is currently in alpha and might change without notice. If this
    command fails with API permission errors despite specifying the correct
    project, you might be trying to access an API with an invitation-only early
    access allowlist.

