gcloud: Wed Jan 8 10:03:00 UTC 2025

gcloud/alpha/compute/interconnects/wire-groups/create

@@ -0,0 +1,106 @@
+NAME
+    gcloud alpha compute interconnects wire-groups create - create a Compute
+        Engine wire group
+
+SYNOPSIS
+    gcloud alpha compute interconnects wire-groups create NAME
+        --bandwidth-unmetered=BANDWIDTH_UNMETERED
+        --cross-site-network=CROSS_SITE_NETWORK --type=TYPE
+        [--admin-enabled=ADMIN_ENABLED]
+        [--bandwidth-allocation=BANDWIDTH_ALLOCATION]
+        [--bandwidth-metered=BANDWIDTH_METERED] [--description=DESCRIPTION]
+        [--fault-response=FAULT_RESPONSE]
+        [--network-service-class=NETWORK_SERVICE_CLASS]
+        [--validate-only=VALIDATE_ONLY] [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    (ALPHA) gcloud alpha compute interconnects wire-groups create is used to
+    create wire groups. A wire group represents a group of redundant wires
+    between interconnects in two different metros. Each WireGroup belongs to a
+    CrossSiteNetwork.
+
+    For an example, refer to the EXAMPLES section below.
+
+EXAMPLES
+    To create a wire group, run:
+
+        $ gcloud alpha compute interconnects wire-groups create \
+            example-wire-group --project my-project \
+            --cross-site-network example-cross-site-network --type WIRE \
+            --bandwidth-unmetered 10g --network-service-class BRONZE \
+            --bandwidth-allocation ALLOCATE_PER_WIRE
+
+POSITIONAL ARGUMENTS
+     NAME
+        Name of the wire group to create.
+
+REQUIRED FLAGS
+     --bandwidth-unmetered=BANDWIDTH_UNMETERED
+        The amount of unmetered bandwidth to assign to the wire group.
+
+     --cross-site-network=CROSS_SITE_NETWORK
+        Name of the crossSiteNetwork to operate on.
+
+     --type=TYPE
+        The type for the wire group. TYPE must be one of:
+
+         BOX_AND_CROSS
+            Box and cross
+         REDUNDANT
+            Redundant
+         WIRE
+            Wire
+
+OPTIONAL FLAGS
+     --admin-enabled=ADMIN_ENABLED
+        Set admin-enabled on the wire group.
+
+     --bandwidth-allocation=BANDWIDTH_ALLOCATION
+        The bandwidth allocation for the wire group. BANDWIDTH_ALLOCATION must
+        be one of:
+
+         ALLOCATE_PER_WIRE
+            Allocate per wire.
+         SHARED_WITH_WIRE_GROUP
+            Shared with wire group.
+
+     --bandwidth-metered=BANDWIDTH_METERED
+        The amount of metered bandwidth to assign to the wire group.
+
+     --description=DESCRIPTION
+        An optional, textual description for the wire group.
+
+     --fault-response=FAULT_RESPONSE
+        The fault response for the wire group. FAULT_RESPONSE must be one of:
+
+         DISABLED_PORT
+            Disabled port
+         NONE
+            None
+
+     --network-service-class=NETWORK_SERVICE_CLASS
+        The network service class for the wire group. NETWORK_SERVICE_CLASS
+        must be one of:
+
+         BRONZE
+            Bronze.
+         GOLD
+            Gold.
+
+     --validate-only=VALIDATE_ONLY
+        Only validates the configuration, but does not create it.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+NOTES
+    This command is currently in alpha and might change without notice. If this
+    command fails with API permission errors despite specifying the correct
+    project, you might be trying to access an API with an invitation-only early
+    access allowlist.
+

gcloud/alpha/compute/interconnects/wire-groups/help

@@ -0,0 +1,28 @@
+NAME
+    gcloud alpha compute interconnects wire-groups - create or manipulate wire
+        groups
+
+SYNOPSIS
+    gcloud alpha compute interconnects wire-groups COMMAND
+        [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    (ALPHA) Create or manipulate wire groups.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --help.
+
+    Run $ gcloud help for details.
+
+COMMANDS
+    COMMAND is one of the following:
+
+     create
+        (ALPHA) Create a Compute Engine wire group.
+
+NOTES
+    This command is currently in alpha and might change without notice. If this
+    command fails with API permission errors despite specifying the correct
+    project, you might be trying to access an API with an invitation-only early
+    access allowlist.
+