gcloud: Wed Feb 15 10:13:15 UTC 2023

gcloud/edge-cloud/networking/subnets/create

@@ -0,0 +1,107 @@
+NAME
+    gcloud edge-cloud networking subnets create - create a Distributed Cloud
+        Edge Network subnet
+
+SYNOPSIS
+    gcloud edge-cloud networking subnets create
+        (SUBNET : --location=LOCATION --zone=ZONE)
+        --ipv4-range=[IPV4_RANGE,...] --network=NETWORK [--async]
+        [--description=DESCRIPTION] [--ipv6-range=[IPV6_RANGE,...]]
+        [--labels=[KEY=VALUE,...]] [--vlan-id=VLAN_ID] [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    Create a new Distributed Cloud Edge Network subnet.
+
+EXAMPLES
+    To create a Distributed Cloud Edge Network subnet called 'my-subnet' with
+    vlan id and owned ip ranges specified in the edge zone
+    'us-central1-edge-den1', run:
+
+        $ gcloud edge-cloud networking subnets create my-subnet \
+            --network=my-network --location=us-central1 \
+            --zone=us-central1-edge-den1 \
+            --ipv4-range=192.168.1.1/24,172.10.10.1/24 \
+            --ipv6-range=2001:db8::1/64,4001:230::1/64 --vlan-id=100
+
+POSITIONAL ARGUMENTS
+     Subnet resource - Distributed Cloud Edge Network subnet to create. The
+     arguments in this group can be used to specify the attributes of this
+     resource. (NOTE) Some attributes are not given arguments in this group but
+     can be set in other ways. To set the project attribute:
+      ◆ provide the argument subnet on the command line with a fully
+        specified name;
+      ◆ set the property core/project;
+      ◆ provide the argument --project on the command line.
+
+     This must be specified.
+
+       SUBNET
+          ID of the subnet or fully qualified identifier for the subnet. To set
+          the subnet attribute:
+          ▸ provide the argument subnet on the command line.
+
+          This positional argument must be specified if any of the other
+          arguments in this group are specified.
+
+       --location=LOCATION
+          The global location name. To set the location attribute:
+          ▸ provide the argument subnet on the command line with a fully
+            specified name;
+          ▸ provide the argument --location on the command line.
+
+       --zone=ZONE
+          The name of the Google Distributed Cloud Edge zone. To set the zone
+          attribute:
+          ▸ provide the argument subnet on the command line with a fully
+            specified name;
+          ▸ provide the argument --zone on the command line.
+
+REQUIRED FLAGS
+     --ipv4-range=[IPV4_RANGE,...]
+        The ranges of ipv4 addresses that are owned by this subnetwork in CIDR
+        format.
+
+     --network=NETWORK
+        The network that this subnetwork belongs to.
+
+OPTIONAL FLAGS
+     --async
+        Return immediately, without waiting for the operation in progress to
+        complete.
+
+     --description=DESCRIPTION
+        An optional, textual description for the subnet.
+
+     --ipv6-range=[IPV6_RANGE,...]
+        The ranges of ipv6 addresses that are owned by this subnetwork in CIDR
+        format.
+
+     --labels=[KEY=VALUE,...]
+        List of label KEY=VALUE pairs to add.
+
+        Keys must start with a lowercase character and contain only hyphens
+        (-), underscores (_), lowercase characters, and numbers. Values must
+        contain only hyphens (-), underscores (_), lowercase characters, and
+        numbers.
+
+     --vlan-id=VLAN_ID
+        The ID of the vlan to tag the subnetwork. If not specified we assign
+        one automatically.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+API REFERENCE
+    This command uses the edgenetwork/v1 API. The full documentation for this
+    API can be found at: https://cloud.google.com/distributed-cloud-edge/docs
+
+NOTES
+    This variant is also available:
+
+        $ gcloud alpha edge-cloud networking subnets create
+

gcloud/edge-cloud/networking/subnets/delete

@@ -0,0 +1,74 @@
+NAME
+    gcloud edge-cloud networking subnets delete - delete a Distributed Cloud
+        Edge Network subnet
+
+SYNOPSIS
+    gcloud edge-cloud networking subnets delete
+        (SUBNET : --location=LOCATION --zone=ZONE) [--async]
+        [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    Delete a Distributed Cloud Edge Network subnet.
+
+EXAMPLES
+    To delete a subnet called 'my-subnet' in the edge zone
+    'us-central1-edge-den1', run:
+
+        $ gcloud edge-cloud networking subnets delete my-subnet \
+            --location=us-central1 --zone=us-central1-edge-den1
+
+POSITIONAL ARGUMENTS
+     Subnet resource - Distributed Cloud Edge Network subnet to delete. The
+     arguments in this group can be used to specify the attributes of this
+     resource. (NOTE) Some attributes are not given arguments in this group but
+     can be set in other ways. To set the project attribute:
+      ◆ provide the argument subnet on the command line with a fully
+        specified name;
+      ◆ set the property core/project;
+      ◆ provide the argument --project on the command line.
+
+     This must be specified.
+
+       SUBNET
+          ID of the subnet or fully qualified identifier for the subnet. To set
+          the subnet attribute:
+          ▸ provide the argument subnet on the command line.
+
+          This positional argument must be specified if any of the other
+          arguments in this group are specified.
+
+       --location=LOCATION
+          The global location name. To set the location attribute:
+          ▸ provide the argument subnet on the command line with a fully
+            specified name;
+          ▸ provide the argument --location on the command line.
+
+       --zone=ZONE
+          The name of the Google Distributed Cloud Edge zone. To set the zone
+          attribute:
+          ▸ provide the argument subnet on the command line with a fully
+            specified name;
+          ▸ provide the argument --zone on the command line.
+
+FLAGS
+     --async
+        Return immediately, without waiting for the operation in progress to
+        complete.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+API REFERENCE
+    This command uses the edgenetwork/v1 API. The full documentation for this
+    API can be found at: https://cloud.google.com/distributed-cloud-edge/docs
+
+NOTES
+    This variant is also available:
+
+        $ gcloud alpha edge-cloud networking subnets delete
+

gcloud/edge-cloud/networking/subnets/describe

@@ -0,0 +1,68 @@
+NAME
+    gcloud edge-cloud networking subnets describe - show details about the
+        Distributed Cloud Edge Network subnet
+
+SYNOPSIS
+    gcloud edge-cloud networking subnets describe
+        (SUBNET : --location=LOCATION --zone=ZONE) [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    Show details about the Distributed Cloud Edge Network subnet.
+
+EXAMPLES
+    To show details about a subnet named 'my-subnet' in the edge zone
+    'us-central1-edge-den1', run:
+
+        $ gcloud edge-cloud networking subnets describe my-subnet \
+            --location=us-central1 --zone=us-central1-edge-den1
+
+POSITIONAL ARGUMENTS
+     Subnet resource - The subnet you want to describe. The arguments in this
+     group can be used to specify the attributes of this resource. (NOTE) Some
+     attributes are not given arguments in this group but can be set in other
+     ways. To set the project attribute:
+      ◆ provide the argument subnet on the command line with a fully
+        specified name;
+      ◆ set the property core/project;
+      ◆ provide the argument --project on the command line.
+
+     This must be specified.
+
+       SUBNET
+          ID of the subnet or fully qualified identifier for the subnet. To set
+          the subnet attribute:
+          ▸ provide the argument subnet on the command line.
+
+          This positional argument must be specified if any of the other
+          arguments in this group are specified.
+
+       --location=LOCATION
+          The global location name. To set the location attribute:
+          ▸ provide the argument subnet on the command line with a fully
+            specified name;
+          ▸ provide the argument --location on the command line.
+
+       --zone=ZONE
+          The name of the Google Distributed Cloud Edge zone. To set the zone
+          attribute:
+          ▸ provide the argument subnet on the command line with a fully
+            specified name;
+          ▸ provide the argument --zone on the command line.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+API REFERENCE
+    This command uses the edgenetwork/v1 API. The full documentation for this
+    API can be found at: https://cloud.google.com/distributed-cloud-edge/docs
+
+NOTES
+    This variant is also available:
+
+        $ gcloud alpha edge-cloud networking subnets describe
+

gcloud/edge-cloud/networking/subnets/help

@@ -0,0 +1,35 @@
+NAME
+    gcloud edge-cloud networking subnets - manage Distributed Cloud Edge
+        Network subnets
+
+SYNOPSIS
+    gcloud edge-cloud networking subnets COMMAND [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    Manage Distributed Cloud Edge Network subnets.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --help.
+
+    Run $ gcloud help for details.
+
+COMMANDS
+    COMMAND is one of the following:
+
+     create
+        Create a Distributed Cloud Edge Network subnet.
+
+     delete
+        Delete a Distributed Cloud Edge Network subnet.
+
+     describe
+        Show details about the Distributed Cloud Edge Network subnet.
+
+     list
+        List Distributed Cloud Edge Network subnets.
+
+NOTES
+    This variant is also available:
+
+        $ gcloud alpha edge-cloud networking subnets
+

gcloud/edge-cloud/networking/subnets/list

@@ -0,0 +1,95 @@
+NAME
+    gcloud edge-cloud networking subnets list - list Distributed Cloud Edge
+        Network subnets
+
+SYNOPSIS
+    gcloud edge-cloud networking subnets list
+        (--zone=ZONE : --location=LOCATION) [--filter=EXPRESSION]
+        [--limit=LIMIT] [--page-size=PAGE_SIZE] [--sort-by=[FIELD,...]] [--uri]
+        [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    List Distributed Cloud Edge Network subnets.
+
+EXAMPLES
+    To list the subnets in the edge zone 'us-central1-edge-den1', run:
+
+        $ gcloud edge-cloud networking subnets list --location=us-central1 \
+            --zone=us-central1-edge-den1
+
+REQUIRED FLAGS
+     Zone resource - Parent Distributed Cloud Edge Network zone to list all
+     contained Distributed Cloud Edge Network subnets. The arguments in this
+     group can be used to specify the attributes of this resource. (NOTE) Some
+     attributes are not given arguments in this group but can be set in other
+     ways. To set the project attribute:
+      ◆ provide the argument --zone on the command line with a fully
+        specified name;
+      ◆ set the property core/project;
+      ◆ provide the argument --project on the command line.
+
+     This must be specified.
+
+       --zone=ZONE
+          ID of the zone or fully qualified identifier for the zone. To set the
+          zone attribute:
+          ▸ provide the argument --zone on the command line.
+
+          This flag argument must be specified if any of the other arguments in
+          this group are specified.
+
+       --location=LOCATION
+          The global location name. To set the location attribute:
+          ▸ provide the argument --zone on the command line with a fully
+            specified name;
+          ▸ provide the argument --location on the command line.
+
+LIST COMMAND FLAGS
+     --filter=EXPRESSION
+        Apply a Boolean filter EXPRESSION to each resource item to be listed.
+        If the expression evaluates True, then that item is listed. For more
+        details and examples of filter expressions, run $ gcloud topic filters.
+        This flag interacts with other flags that are applied in this order:
+        --flatten, --sort-by, --filter, --limit.
+
+     --limit=LIMIT
+        Maximum number of resources to list. The default is unlimited. This
+        flag interacts with other flags that are applied in this order:
+        --flatten, --sort-by, --filter, --limit.
+
+     --page-size=PAGE_SIZE
+        Some services group resource list output into pages. This flag
+        specifies the maximum number of resources per page. The default is
+        determined by the service if it supports paging, otherwise it is
+        unlimited (no paging). Paging may be applied before or after --filter
+        and --limit depending on the service.
+
+     --sort-by=[FIELD,...]
+        Comma-separated list of resource field key names to sort by. The
+        default order is ascending. Prefix a field with ``~'' for descending
+        order on that field. This flag interacts with other flags that are
+        applied in this order: --flatten, --sort-by, --filter, --limit.
+
+     --uri
+        Print a list of resource URIs instead of the default output, and change
+        the command output to a list of URIs. If this flag is used with
+        --format, the formatting is applied on this URI list. To display URIs
+        alongside other keys instead, use the uri() transform.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+API REFERENCE
+    This command uses the edgenetwork/v1 API. The full documentation for this
+    API can be found at: https://cloud.google.com/distributed-cloud-edge/docs
+
+NOTES
+    This variant is also available:
+
+        $ gcloud alpha edge-cloud networking subnets list
+