gcloud: Wed Oct 11 10:37:28 UTC 2023

gcloud/compute/interconnects/macsec/add-key

@@ -0,0 +1,53 @@
+NAME
+    gcloud compute interconnects macsec add-key - add pre-shared key to a
+        Compute Engine interconnect MACsec configuration
+
+SYNOPSIS
+    gcloud compute interconnects macsec add-key NAME --key-name=KEY_NAME
+        [--start-time=START_TIME] [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    gcloud compute interconnects macsec add-key is used to add a pre-shared key
+    to MACsec configuration of interconnect.
+
+    For an example, refer to the EXAMPLES section below.
+
+EXAMPLES
+    To add a pre-shared key to MACsec configuration, run:
+
+        $ gcloud compute interconnects macsec add-key example-interconnect \
+            --key-name=default-key --start-time=2021-02-01T12:12:12Z
+
+POSITIONAL ARGUMENTS
+     NAME
+        Name of the interconnect to update.
+
+REQUIRED FLAGS
+     --key-name=KEY_NAME
+        A name of pre-shared key being added to MACsec configuration of the
+        interconnect. The name must be 1-63 characters long, and comply with
+        RFC1035.
+
+OPTIONAL FLAGS
+     --start-time=START_TIME
+        A RFC3339 timestamp on or after which the key is valid. startTime can
+        be in the future. If the keychain has a single key, --start-time can be
+        omitted. If the keychain has multiple keys, --start-time is mandatory
+        for each key. The start times of two consecutive keys must be at least
+        6 hours apart.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+NOTES
+    These variants are also available:
+
+        $ gcloud alpha compute interconnects macsec add-key
+
+        $ gcloud beta compute interconnects macsec add-key
+

gcloud/compute/interconnects/macsec/get-config

@@ -0,0 +1,39 @@
+NAME
+    gcloud compute interconnects macsec get-config - get MACsec configuration
+        of a Compute Engine interconnect
+
+SYNOPSIS
+    gcloud compute interconnects macsec get-config NAME [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    gcloud compute interconnects macsec get-config displays all MACsec
+    configuration data associated with Compute Engine interconnect in a
+    project.
+
+    For an example, refer to the EXAMPLES section below.
+
+EXAMPLES
+    To displays all MACsec configuration data associated with Compute Engine
+    interconnect in a project, run:
+
+        $ gcloud compute interconnects macsec get-config example-interconnect
+
+POSITIONAL ARGUMENTS
+     NAME
+        Name of the interconnect to describe.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+NOTES
+    These variants are also available:
+
+        $ gcloud alpha compute interconnects macsec get-config
+
+        $ gcloud beta compute interconnects macsec get-config
+

gcloud/compute/interconnects/macsec/help

@@ -0,0 +1,43 @@
+NAME
+    gcloud compute interconnects macsec - read and manipulate Compute Engine
+        interconnect MACsec configuration
+
+SYNOPSIS
+    gcloud compute interconnects macsec COMMAND [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    Read and manipulate Compute Engine interconnect MACsec configuration.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --help.
+
+    Run $ gcloud help for details.
+
+COMMANDS
+    COMMAND is one of the following:
+
+     add-key
+        Add pre-shared key to a Compute Engine interconnect MACsec
+        configuration.
+
+     get-config
+        Get MACsec configuration of a Compute Engine interconnect.
+
+     remove-key
+        Remove pre-shared key from a Compute Engine interconnect MACsec
+        configuration.
+
+     update
+        Update a Compute Engine interconnect MACsec configuration.
+
+     update-key
+        Update pre-shared key in a Compute Engine interconnect MACsec
+        configuration.
+
+NOTES
+    These variants are also available:
+
+        $ gcloud alpha compute interconnects macsec
+
+        $ gcloud beta compute interconnects macsec
+

gcloud/compute/interconnects/macsec/remove-key

@@ -0,0 +1,44 @@
+NAME
+    gcloud compute interconnects macsec remove-key - remove pre-shared key from
+        a Compute Engine interconnect MACsec configuration
+
+SYNOPSIS
+    gcloud compute interconnects macsec remove-key NAME --key-name=KEY_NAME
+        [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    gcloud compute interconnects macsec remove-key is used to remove pre-shared
+    key from MACsec configuration of interconnect.
+
+    For an example, refer to the EXAMPLES section below.
+
+EXAMPLES
+    To remove a pre-shared key from MACsec configuration, run:
+
+        $ gcloud compute interconnects macsec remove-key \
+            example-interconnect --key-name=default-key
+
+POSITIONAL ARGUMENTS
+     NAME
+        Name of the interconnect to update.
+
+REQUIRED FLAGS
+     --key-name=KEY_NAME
+        The name of pre-shared key being removed from MACsec configuration of
+        the interconnect.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+NOTES
+    These variants are also available:
+
+        $ gcloud alpha compute interconnects macsec remove-key
+
+        $ gcloud beta compute interconnects macsec remove-key
+

gcloud/compute/interconnects/macsec/update

@@ -0,0 +1,54 @@
+NAME
+    gcloud compute interconnects macsec update - update a Compute Engine
+        interconnect MACsec configuration
+
+SYNOPSIS
+    gcloud compute interconnects macsec update NAME [--enabled] [--fail-open]
+        [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    gcloud compute interconnects macsec update is used to update MACsec
+    configuration of interconnect. An interconnect represents a single specific
+    connection between Google and the customer.
+
+    For an example, refer to the EXAMPLES section below.
+
+EXAMPLES
+    To enable MACsec on an interconnect, run:
+
+        $ gcloud compute interconnects macsec update example-interconnect \
+            --enabled
+
+POSITIONAL ARGUMENTS
+     NAME
+        Name of the interconnect to update.
+
+FLAGS
+     --enabled
+        Enable or disable MACsec on this Interconnect. MACsec enablement will
+        fail if the MACsec configuration is not specified. Use --no-enabled to
+        disable it.
+
+     --fail-open
+        If enabled, the Interconnect will be configured with a should-secure
+        MACsec security policy, that allows the Google router to fallback to
+        cleartext traffic if the MKA session cannot be established. By default,
+        the Interconnect will be configured with a must-secure security policy
+        that drops all traffic if the MKA session cannot be established with
+        your router. Use --no-fail-open to disable it.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+NOTES
+    These variants are also available:
+
+        $ gcloud alpha compute interconnects macsec update
+
+        $ gcloud beta compute interconnects macsec update
+

gcloud/compute/interconnects/macsec/update-key

@@ -0,0 +1,54 @@
+NAME
+    gcloud compute interconnects macsec update-key - update pre-shared key in a
+        Compute Engine interconnect MACsec configuration
+
+SYNOPSIS
+    gcloud compute interconnects macsec update-key NAME --key-name=KEY_NAME
+        [--start-time=START_TIME] [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    gcloud compute interconnects macsec update-key is used to update a
+    pre-shared key in MACsec configuration of interconnect.
+
+    For an example, refer to the EXAMPLES section below.
+
+EXAMPLES
+    To update a pre-shared key in MACsec configuration, run:
+
+        $ gcloud compute interconnects macsec update-key \
+            example-interconnect --key-name=default-key \
+            --start-time=2021-02-01T12:12:12Z
+
+POSITIONAL ARGUMENTS
+     NAME
+        Name of the interconnect to update.
+
+REQUIRED FLAGS
+     --key-name=KEY_NAME
+        A name of pre-shared key being added to MACsec configuration of the
+        interconnect. The name must be 1-63 characters long, and comply with
+        RFC1035.
+
+OPTIONAL FLAGS
+     --start-time=START_TIME
+        A RFC3339 timestamp on or after which the key is valid. startTime can
+        be in the future. If the keychain has a single key, --start-time can be
+        omitted. If the keychain has multiple keys, --start-time is mandatory
+        for each key. The start times of two consecutive keys must be at least
+        6 hours apart.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+NOTES
+    These variants are also available:
+
+        $ gcloud alpha compute interconnects macsec update-key
+
+        $ gcloud beta compute interconnects macsec update-key
+