gcloud: Wed May 24 10:23:00 UTC 2023

gcloud/beta/network-security/firewall-endpoints/create

@@ -0,0 +1,90 @@
+NAME
+    gcloud beta network-security firewall-endpoints create - create a Firewall
+        Plus endpoint
+
+SYNOPSIS
+    gcloud beta network-security firewall-endpoints create
+        (FIREWALL_ENDPOINT : --organization=ORGANIZATION --zone=ZONE) [--async]
+        [--labels=[KEY=VALUE,...]] [--max-wait=MAX_WAIT; default="60m"]
+        [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    (BETA) Create a firewall endpoint. Successful creation of an endpoint
+    results in an endpoint in READY state. Check the progress of endpoint
+    creation by using gcloud network-security firewall-endpoints list.
+
+    For more examples, refer to the EXAMPLES section below.
+
+EXAMPLES
+    To create a firewall endpoint called my-endpoint, in zone us-central1-a and
+    organization ID 1234, run:
+
+        $ gcloud beta network-security firewall-endpoints create \
+            my-endpoint --zone=us-central1-a --organization=1234
+
+POSITIONAL ARGUMENTS
+     Firewall endpoint resource - Firewall Plus. The arguments in this group
+     can be used to specify the attributes of this resource.
+
+     This must be specified.
+
+       FIREWALL_ENDPOINT
+          ID of the firewall endpoint or fully qualified identifier for the
+          firewall endpoint.
+
+          To set the endpoint-name attribute:
+          ▸ provide the argument FIREWALL_ENDPOINT on the command line.
+
+          This positional argument must be specified if any of the other
+          arguments in this group are specified.
+
+       --organization=ORGANIZATION
+          Organization ID of the firewall endpoint.
+
+          To set the organization attribute:
+          ▸ provide the argument FIREWALL_ENDPOINT on the command line with a
+            fully specified name;
+          ▸ provide the argument --organization on the command line.
+
+       --zone=ZONE
+          Zone of the firewall endpoint.
+
+          To set the zone attribute:
+          ▸ provide the argument FIREWALL_ENDPOINT on the command line with a
+            fully specified name;
+          ▸ provide the argument --zone on the command line.
+
+FLAGS
+     --async
+        Return immediately, without waiting for the operation in progress to
+        complete. The default is True. Enabled by default, use --no-async to
+        disable.
+
+     --labels=[KEY=VALUE,...]
+        List of label KEY=VALUE pairs to add.
+
+        Keys must start with a lowercase character and contain only hyphens
+        (-), underscores (_), lowercase characters, and numbers. Values must
+        contain only hyphens (-), underscores (_), lowercase characters, and
+        numbers.
+
+     --max-wait=MAX_WAIT; default="60m"
+        Time to synchronously wait for the operation to complete, after which
+        the operation continues asynchronously. Ignored if --no-async isn't
+        specified. See $ gcloud topic datetimes for information on time
+        formats.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+NOTES
+    This command is currently in beta and might change without notice. This
+    variant is also available:
+
+        $ gcloud alpha network-security firewall-endpoints create
+

gcloud/beta/network-security/firewall-endpoints/delete

@@ -0,0 +1,86 @@
+NAME
+    gcloud beta network-security firewall-endpoints delete - delete a Firewall
+        Plus endpoint
+
+SYNOPSIS
+    gcloud beta network-security firewall-endpoints delete
+        (FIREWALL_ENDPOINT : --organization=ORGANIZATION --zone=ZONE) [--async]
+        [--max-wait=MAX_WAIT; default="60m"] [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    (BETA) Delete a firewall endpoint. Check the progress of endpoint deletion
+    by using gcloud network-security firewall-endpoints list.
+
+    For more examples, refer to the EXAMPLES section below.
+
+EXAMPLES
+    To delete a firewall endpoint called my-endpoint, in zone us-central1-a and
+    organization ID 1234, run:
+
+        $ gcloud beta network-security firewall-endpoints delete \
+            my-endpoint --zone=us-central1-a --organization=1234
+
+    OR
+
+        $ gcloud beta network-security firewall-endpoints delete \
+            organizations/1234/locations/us-central1-a/firewallEndpoints/\
+        my-endpoint
+
+POSITIONAL ARGUMENTS
+     Firewall endpoint resource - Firewall Plus. The arguments in this group
+     can be used to specify the attributes of this resource.
+
+     This must be specified.
+
+       FIREWALL_ENDPOINT
+          ID of the firewall endpoint or fully qualified identifier for the
+          firewall endpoint.
+
+          To set the endpoint-name attribute:
+          ▸ provide the argument FIREWALL_ENDPOINT on the command line.
+
+          This positional argument must be specified if any of the other
+          arguments in this group are specified.
+
+       --organization=ORGANIZATION
+          Organization ID of the firewall endpoint.
+
+          To set the organization attribute:
+          ▸ provide the argument FIREWALL_ENDPOINT on the command line with a
+            fully specified name;
+          ▸ provide the argument --organization on the command line.
+
+       --zone=ZONE
+          Zone of the firewall endpoint.
+
+          To set the zone attribute:
+          ▸ provide the argument FIREWALL_ENDPOINT on the command line with a
+            fully specified name;
+          ▸ provide the argument --zone on the command line.
+
+FLAGS
+     --async
+        Return immediately, without waiting for the operation in progress to
+        complete. The default is True. Enabled by default, use --no-async to
+        disable.
+
+     --max-wait=MAX_WAIT; default="60m"
+        Time to synchronously wait for the operation to complete, after which
+        the operation continues asynchronously. Ignored if --no-async isn't
+        specified. See $ gcloud topic datetimes for information on time
+        formats.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+NOTES
+    This command is currently in beta and might change without notice. This
+    variant is also available:
+
+        $ gcloud alpha network-security firewall-endpoints delete
+

gcloud/beta/network-security/firewall-endpoints/describe

@@ -0,0 +1,73 @@
+NAME
+    gcloud beta network-security firewall-endpoints describe - describe a
+        Firewall Plus endpoint
+
+SYNOPSIS
+    gcloud beta network-security firewall-endpoints describe
+        (FIREWALL_ENDPOINT : --organization=ORGANIZATION --zone=ZONE)
+        [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    (BETA) Describe a firewall endpoint.
+
+    For more examples, refer to the EXAMPLES section below.
+
+EXAMPLES
+    To get a description of a firewall endpoint called my-endpoint in zone
+    us-central1-a and organization ID 1234, run:
+
+        $ gcloud beta network-security firewall-endpoints describe \
+            my-endpoint --zone=us-central1-a --organization=1234
+
+    OR
+
+        $ gcloud beta network-security firewall-endpoints describe \
+            organizations/1234/locations/us-central1-a/firewallEndpoints/\
+        my-endpoint
+
+POSITIONAL ARGUMENTS
+     Firewall endpoint resource - Firewall Plus. The arguments in this group
+     can be used to specify the attributes of this resource.
+
+     This must be specified.
+
+       FIREWALL_ENDPOINT
+          ID of the firewall endpoint or fully qualified identifier for the
+          firewall endpoint.
+
+          To set the endpoint-name attribute:
+          ▸ provide the argument FIREWALL_ENDPOINT on the command line.
+
+          This positional argument must be specified if any of the other
+          arguments in this group are specified.
+
+       --organization=ORGANIZATION
+          Organization ID of the firewall endpoint.
+
+          To set the organization attribute:
+          ▸ provide the argument FIREWALL_ENDPOINT on the command line with a
+            fully specified name;
+          ▸ provide the argument --organization on the command line.
+
+       --zone=ZONE
+          Zone of the firewall endpoint.
+
+          To set the zone attribute:
+          ▸ provide the argument FIREWALL_ENDPOINT on the command line with a
+            fully specified name;
+          ▸ provide the argument --zone on the command line.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+NOTES
+    This command is currently in beta and might change without notice. This
+    variant is also available:
+
+        $ gcloud alpha network-security firewall-endpoints describe
+

gcloud/beta/network-security/firewall-endpoints/help

@@ -0,0 +1,37 @@
+NAME
+    gcloud beta network-security firewall-endpoints - create and manage
+        Firewall Plus endpoints
+
+SYNOPSIS
+    gcloud beta network-security firewall-endpoints COMMAND
+        [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    (BETA) Create and manage Firewall Plus endpoints.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --help.
+
+    Run $ gcloud help for details.
+
+COMMANDS
+    COMMAND is one of the following:
+
+     create
+        (BETA) Create a Firewall Plus endpoint.
+
+     delete
+        (BETA) Delete a Firewall Plus endpoint.
+
+     describe
+        (BETA) Describe a Firewall Plus endpoint.
+
+     list
+        (BETA) List Firewall Plus endpoints.
+
+NOTES
+    This command is currently in beta and might change without notice. This
+    variant is also available:
+
+        $ gcloud alpha network-security firewall-endpoints
+

gcloud/beta/network-security/firewall-endpoints/list

@@ -0,0 +1,74 @@
+NAME
+    gcloud beta network-security firewall-endpoints list - list Firewall Plus
+        endpoints
+
+SYNOPSIS
+    gcloud beta network-security firewall-endpoints list
+        --organization=ORGANIZATION --zone=ZONE [--filter=EXPRESSION]
+        [--limit=LIMIT] [--page-size=PAGE_SIZE] [--sort-by=[FIELD,...]] [--uri]
+        [GCLOUD_WIDE_FLAG ...]
+
+DESCRIPTION
+    (BETA) List firewall endpoints.
+
+    For more examples, refer to the EXAMPLES section below.
+
+EXAMPLES
+    To list firewall endpoints in organization ID 1234, run:
+
+        $ gcloud beta network-security firewall-endpoints list \
+            --organization=1234
+
+REQUIRED FLAGS
+     --organization=ORGANIZATION
+        The organization for a list operation
+
+     --zone=ZONE
+        The zone for a list operation
+
+LIST COMMAND FLAGS
+     --filter=EXPRESSION
+        Apply a Boolean filter EXPRESSION to each resource item to be listed.
+        If the expression evaluates True, then that item is listed. For more
+        details and examples of filter expressions, run $ gcloud topic filters.
+        This flag interacts with other flags that are applied in this order:
+        --flatten, --sort-by, --filter, --limit.
+
+     --limit=LIMIT
+        Maximum number of resources to list. The default is unlimited. This
+        flag interacts with other flags that are applied in this order:
+        --flatten, --sort-by, --filter, --limit.
+
+     --page-size=PAGE_SIZE
+        Some services group resource list output into pages. This flag
+        specifies the maximum number of resources per page. The default is
+        determined by the service if it supports paging, otherwise it is
+        unlimited (no paging). Paging may be applied before or after --filter
+        and --limit depending on the service.
+
+     --sort-by=[FIELD,...]
+        Comma-separated list of resource field key names to sort by. The
+        default order is ascending. Prefix a field with ``~'' for descending
+        order on that field. This flag interacts with other flags that are
+        applied in this order: --flatten, --sort-by, --filter, --limit.
+
+     --uri
+        Print a list of resource URIs instead of the default output, and change
+        the command output to a list of URIs. If this flag is used with
+        --format, the formatting is applied on this URI list. To display URIs
+        alongside other keys instead, use the uri() transform.
+
+GCLOUD WIDE FLAGS
+    These flags are available to all commands: --access-token-file, --account,
+    --billing-project, --configuration, --flags-file, --flatten, --format,
+    --help, --impersonate-service-account, --log-http, --project, --quiet,
+    --trace-token, --user-output-enabled, --verbosity.
+
+    Run $ gcloud help for details.
+
+NOTES
+    This command is currently in beta and might change without notice. This
+    variant is also available:
+
+        $ gcloud alpha network-security firewall-endpoints list
+