gcloud-help/gcloud/alpha/compute/security-policies/rules/update

NAME
    gcloud alpha compute security-policies rules update - update a Compute
        Engine security policy rule

SYNOPSIS
    gcloud alpha compute security-policies rules update PRIORITY
        [--action=ACTION] [--ban-duration-sec=BAN_DURATION_SEC]
        [--ban-threshold-count=BAN_THRESHOLD_COUNT]
        [--ban-threshold-interval-sec=BAN_THRESHOLD_INTERVAL_SEC]
        [--conform-action=CONFORM_ACTION] [--description=DESCRIPTION]
        [--enforce-on-key=ENFORCE_ON_KEY]
        [--enforce-on-key-name=ENFORCE_ON_KEY_NAME]
        [--exceed-action=EXCEED_ACTION]
        [--exceed-redirect-target=EXCEED_REDIRECT_TARGET]
        [--exceed-redirect-type=EXCEED_REDIRECT_TYPE] [--preview]
        [--rate-limit-threshold-count=RATE_LIMIT_THRESHOLD_COUNT]
        [--rate-limit-threshold-interval-sec=RATE_LIMIT_THRESHOLD_INTERVAL_SEC]
        [--redirect-target=REDIRECT_TARGET] [--redirect-type=REDIRECT_TYPE]
        [--request-headers-to-add=[REQUEST_HEADERS_TO_ADD,...]]
        [--security-policy=SECURITY_POLICY]
        [--expression=EXPRESSION | --src-ip-ranges=[SRC_IP_RANGE,...]]
        [GCLOUD_WIDE_FLAG ...]

DESCRIPTION
    (ALPHA) gcloud alpha compute security-policies rules update is used to
    update security policy rules.

    For example to update the description and IP ranges of a rule at priority
    1000, run:

        $ gcloud alpha compute security-policies rules update 1000 \
            --security-policy my-policy \
            --description "block 1.2.3.4/32" \
            --src-ip-ranges 1.2.3.4/32

POSITIONAL ARGUMENTS
     PRIORITY
        The priority of the rule to update. Rules are evaluated in order from
        highest priority to lowest priority where 0 is the highest priority and
        2147483647 is the lowest priority.

FLAGS
     --action=ACTION
        The action to take if the request matches the match condition. ACTION
        must be one of:

         allow
            Allows the request from HTTP(S) Load Balancing.
         deny
            Denies the request from TCP/SSL Proxy Load Balancing.
         deny-403
            Denies the request from HTTP(S) Load Balancing, with an HTTP
            response status code of 403.
         deny-404
            Denies the request from HTTP(S) Load Balancing, with an HTTP
            response status code of 404.
         deny-502
            Denies the request from HTTP(S) Load Balancing, with an HTTP
            response status code of 503.
         rate-based-ban
            Enforces rate-based ban action from HTTP(S) Load Balancing, based
            on rate limit options.
         redirect
            Redirects the request from HTTP(S) Load Balancing, based on
            redirect options.
         redirect-to-recaptcha
            (DEPRECATED) Redirects the request from HTTP(S) Load Balancing, for
            reCAPTCHA Enterprise assessment. This flag choice is deprecated.
            Use --action=redirect and --redirect-type=google-recaptcha instead.
         throttle
            Enforces throttle action from HTTP(S) Load Balancing, based on rate
            limit options.

     --ban-duration-sec=BAN_DURATION_SEC
        Can only be specified if the action for the rule is rate-based-ban. If
        specified, determines the time (in seconds) the traffic will continue
        to be banned by the rate limit after the rate falls below the
        threshold.

     --ban-threshold-count=BAN_THRESHOLD_COUNT
        Number of HTTP(S) requests for calculating the threshold for banning
        requests. Can only be specified if the action for the rule is
        rate-based-ban. If specified, the key will be banned for the configured
        BAN_DURATION_SEC when the number of requests that exceed the
        RATE_LIMIT_THRESHOLD_COUNT also exceed this BAN_THRESHOLD_COUNT.

     --ban-threshold-interval-sec=BAN_THRESHOLD_INTERVAL_SEC
        Interval over which the threshold for banning requests is computed. Can
        only be specified if the action for the rule is rate-based-ban. If
        specified, the key will be banned for the configured BAN_DURATION_SEC
        when the number of requests that exceed the RATE_LIMIT_THRESHOLD_COUNT
        also exceed this BAN_THRESHOLD_COUNT.

     --conform-action=CONFORM_ACTION
        Action to take when requests are under the given threshold. When
        requests are throttled, this is also the action for all requests which
        are not dropped. CONFORM_ACTION must be (currently only one value is
        supported): allow.

     --description=DESCRIPTION
        An optional, textual description for the rule.

     --enforce-on-key=ENFORCE_ON_KEY
        Different key types available to enforce the rate limit threshold limit
        on:
        ◆ ip: each client IP address has this limit enforced separately
        ◆ all: a single limit is applied to all requests matching this rule
        ◆ http-header: key type takes the value of the HTTP header configured
          in enforce-on-key-name as the key value
        ◆ xff-ip: takes the original IP address specified in the
          X-Forwarded-For header as the key
        ◆ http-cookie: key type takes the value of the HTTP cookie configured
          in enforce-on-key-name as the key value

        ENFORCE_ON_KEY must be one of: ip, all, http-header, xff-ip,
        http-cookie.

     --enforce-on-key-name=ENFORCE_ON_KEY_NAME
        Determines the key name for the rate limit key. Applicable only for the
        following rate limit key types:
        ◆ http-header: The name of the HTTP header whose value is taken as
          the key value.
        ◆ http-cookie: The name of the HTTP cookie whose value is taken as
          the key value.

     --exceed-action=EXCEED_ACTION
        Action to take when requests are above the given threshold. When a
        request is denied, return the specified HTTP response code. When a
        request is redirected, use the redirect options based on
        --exceed-redirect-type and --exceed-redirect-target below.
        EXCEED_ACTION must be one of: deny-403, deny-404, deny-429, deny-502,
        deny, redirect.

     --exceed-redirect-target=EXCEED_REDIRECT_TARGET
        URL target for the redirect action that is configured as the exceed
        action when the redirect type is external-302.

     --exceed-redirect-type=EXCEED_REDIRECT_TYPE
        Type for the redirect action that is configured as the exceed action.
        EXCEED_REDIRECT_TYPE must be one of: google-recaptcha, external-302.

     --preview
        If specified, the action will not be enforced.

     --rate-limit-threshold-count=RATE_LIMIT_THRESHOLD_COUNT
        Number of HTTP(S) requests for calculating the threshold for rate
        limiting requests.

     --rate-limit-threshold-interval-sec=RATE_LIMIT_THRESHOLD_INTERVAL_SEC
        Interval over which the threshold for rate limiting requests is
        computed.

     --redirect-target=REDIRECT_TARGET
        URL target for the redirect action. Must be specified if the redirect
        type is external-302. Cannot be specified if the redirect type is
        google-recaptcha.

     --redirect-type=REDIRECT_TYPE
        Type for the redirect action. Default to external-302 if unspecified
        while --redirect-target is given. REDIRECT_TYPE must be one of:
        google-recaptcha, external-302.

     --request-headers-to-add=[REQUEST_HEADERS_TO_ADD,...]
        A comma-separated list of header names and header values to add to
        requests that match this rule.

     --security-policy=SECURITY_POLICY
        The security policy that this rule belongs to.

     Security policy rule matcher.

     At most one of these can be specified:

       --expression=EXPRESSION
          The Cloud Armor rules language expression to match for this rule.

       --src-ip-ranges=[SRC_IP_RANGE,...]
          The source IPs/IP ranges to match for this rule. To match all IPs
          specify *.

GCLOUD WIDE FLAGS
    These flags are available to all commands: --access-token-file, --account,
    --billing-project, --configuration, --flags-file, --flatten, --format,
    --help, --impersonate-service-account, --log-http, --project, --quiet,
    --trace-token, --user-output-enabled, --verbosity.

    Run $ gcloud help for details.

NOTES
    This command is currently in alpha and might change without notice. If this
    command fails with API permission errors despite specifying the correct
    project, you might be trying to access an API with an invitation-only early
    access allowlist. These variants are also available:

        $ gcloud compute security-policies rules update

        $ gcloud beta compute security-policies rules update